Re-screening
One torn panel or a full pool cage, mesh matched to your existing screen.
Service area · FL
Screen & pool-cage repair in Anna Maria Island
Anna Maria Island's beach cottages and vacation rentals live in some of the harshest conditions a pool cage can face - salt air, hard sun, and no-see-ums that never let up. The most common calls we get from the island are full pool-cage re-screens where the old mesh has gone brittle and torn, and screen-door repairs where salt-corroded hardware has made the door drag or stop closing. Being this close to the Gulf, a cage on the island simply does not get the lifespan out of screen and hardware that the same enclosure would inland. We are a repair-only crew, so we do not sell new enclosures - we fix what you already have, from a single torn panel to a full re-screen, and we do it with materials meant to hold up to island exposure.
Local know-how
What screen enclosures face in Anna Maria Island
Anna Maria Island is about as hard on a screen enclosure as it gets. Surrounded by the Gulf and the bay, the island's salt-laden air corrodes everything metal - screws, hinges, door closers, frame fasteners - and it does it fast. On the island, the smart repair almost always means swapping in corrosion-resistant hardware, because standard fasteners simply won't last another season here.
The screen itself takes a double hit: unfiltered UV off the water makes mesh brittle quickly, and storm exposure on a barrier island is as direct as it comes. After a blow, island pool cages and lanais are often the first to lose panels, so we keep storm slots open for Anna Maria, Holmes Beach and Bradenton Beach and document everything for insurance.
And no-see-ums are a genuine island nuisance - the standard mesh on most cages here is far too open to stop them. The real fix is a tighter no-see-um weave fitted to your existing frame, so your screened porch is actually usable at dusk. We re-screen tight, reseal the gaps, and leave the enclosure ready for island life.
Neighborhoods we serve in Anna Maria Island
We cover the whole island - Anna Maria, Holmes Beach, and Bradenton Beach - plus the bridge communities back toward the mainland.
Gulf-front, bay-side, or tucked on an interior street, the salt reaches every cage on the island, and we repair them all. Reach out for a free screen check and we'll confirm your spot.
Common Anna Maria Island repairs
The single biggest problem on Anna Maria Island is no-see-ums getting through screen that looks perfectly intact. Standard 18x14 mesh has openings large enough for these tiny biting midges to pass right through, and on a barrier island where they breed in the wrack and tidal flats, they are present almost year-round. Re-screening with finer no-see-um mesh solves that, and it is one of the most common upgrades we do on the island. The trade-off is that tighter mesh cuts airflow slightly and catches more wind load, so it has to be tensioned correctly and splined tight or it will balloon and pull loose - we set it accordingly.
Beyond that, corroded fasteners are a constant - screws that have rusted flush with the frame can strip when you try to remove them, and we carry the tools and replacement hardware specifically for that situation. Storm-torn panels after a tropical system or a strong afternoon thunderstorm are common calls, with multiple panels blown out or the screen fabric separated from the spline channel entirely. Salt spray and pool chemistry together also chew at the lower panels and the kick plates, so the bottom of a cage often fails before the top.
Screen doors on rental cottages take hard use: rollers wear, hinges pull loose from the frame, latches corrode shut or stop catching, and door closers lose tension. We address each of those individually so you do not replace a whole door when only the hardware has failed. Catching these small failures early is what keeps a repair small - a dragging door left alone will bend its own frame in a season of guest use.
What to expect when we fix your screens in Anna Maria Island
When you call us about a cage or lanai on Anna Maria Island, we come to the property, walk the entire enclosure, and give you a written flat quote before any work starts - no hourly surprises. We will tell you plainly what needs doing now and what can wait, so you are not paying for anything the cage does not need. Because we work the island regularly, we can usually schedule within the week, and most jobs are done in a single visit.
On the day, we pull the old fabric and spline, clean out the channels, and set new screen tensioned into the frame so it sits flat and tight. We haul away all the old screen fabric and used spline when we go, so the property is clean for the next guest check-in. If a storm has caused the damage, we document what we find with photos and notes in a format that supports a homeowner's insurance claim - we have done that often enough on Anna Maria that we know what adjusters typically need to see.
There are no contracts, no maintenance programs to sign up for, and no pressure. You get a repair, a clean job site, and a crew that will come back if anything is not right. We are the same people who did the work, so if a panel needs a second look, you are not routed through anyone else.
What we fix
Repairs for every part of your Anna Maria Island enclosure
Screen doors
Rollers, hinges, latches and closers - or a full new door fitted to your frame.
Storm damage
Priority repair of blown-out panels, documented for your insurance claim.
Hardware & spline
Corroded fasteners swapped, loose frames re-secured, rippling screen re-tensioned.
Common questions
Screen repair in Anna Maria Island, answered
My rental cottage on Anna Maria Island goes through heavy guest traffic. How often should the screen doors be serviced?
On a busy rental, screen-door hardware - rollers, latches, and closers - can wear out in a single heavy season. We recommend a look at the doors any time you notice dragging, a latch that does not catch, or a door that swings open on its own. Salt air speeds all of this up on the island, seizing rollers and corroding latch springs faster than you would expect. Catching it early costs far less than replacing a bent frame later, because a door that drags will grind its own track and rack the frame out of square. A quick hardware swap keeps the whole door usable for the next guest.
We still get no-see-ums inside the cage even though the screen looks fine. What is going on?
Standard 18x14 mesh, which is what most cages on Anna Maria were built with, has gaps wide enough for no-see-ums to pass through. The screen is not damaged - it just was not designed to stop them. Re-screening with finer no-see-um mesh is the fix, and it makes a dramatic difference on a barrier island where those midges are relentless near the water, especially at dawn and dusk when they come in off the flats. The finer weave catches a little more wind and cuts airflow slightly, so we tension and spline it properly to keep it flat. Most owners upgrade the whole cage at once so there is no weak panel left for the midges to find.
A tropical storm ripped out several panels on my Holmes Beach pool cage. Can you document the damage for my insurance claim?
Yes. Storm calls on Anna Maria Island are something we handle regularly. We photograph every damaged panel and failed fastener, note the extent of the spline and frame damage, and provide written documentation in a format that most insurance adjusters find straightforward to work with. Get us out before you alter anything if you can, since adjusters want to see the damage as the storm left it rather than a patched-over version. If you have to clear something for safety, take your own photos first. Once the claim side is documented, we can move ahead with the actual repair - replacing blown panels, re-splining, and swapping any hardware the storm loosened.
The screws on my cage frame near the beach look completely corroded. Do you replace hardware, or just the screen fabric?
We replace the hardware. Corroded screws, rusted spline retainers, and failed door hardware are all part of a proper repair on Anna Maria Island - you cannot tension new screen correctly into a frame held together with stripped or rust-seized fasteners. We carry stainless and coated replacement hardware suited for the salt-air exposure here, which holds up far longer than the plain fasteners many cages were built with. If a screw has seized flush with the frame, we have the tools to back it out or drill it without wrecking the channel. Doing it this way means the new screen has something solid to grip, so the repair actually lasts through the seasons instead of loosening again.
My Anna Maria cottage has an older screened lanai rather than a full pool cage. Do you work on those smaller older enclosures?
Absolutely. Many of the north-end cottages have modest screened lanais that predate the larger aluminum pool cages common on newer builds. We re-screen single panels, replace spline in old channels, and repair or replace the screen doors on those older structures just as readily as we work on full pool cages in Holmes Beach or Bradenton Beach. Older frames do take a closer look, because the aluminum can be oxidized and the channels may have shrunk or cracked at the corners, so we check that the channel will still hold new spline before we set the screen. If a channel is too far gone, we will tell you honestly what can be repaired and what cannot.
Got a screen to fix in Anna Maria Island?
Send a photo or book a free on-site screen check - we'll tell you exactly what it needs and what it costs.