Serving Manatee & Sarasota County
Manatee & Sarasota County Screen Repair
Pool Cage and Screen Repair in Manatee and Sarasota County
From a single torn panel to a full pool-cage re-screen, Suncoast Screen handles it across Manatee and Sarasota County.
Suncoast Screen repairs and re-screens pool cages, lanais and screen doors throughout Manatee and Sarasota County. That covers everything from a single damaged panel on a Bradenton patio to a complete pool-cage re-screen on Siesta Key.
Screens are the only thing this company does. That focus matters because a torn screen is rarely just a mesh problem. Spline channels wear out and fasteners corrode in salt air. Frame corners loosen over time as well. When those go unnoticed, a repair that should last for years fails in months. Suncoast Screen checks the full frame and spline channel on every job, and uses hardware chosen specifically to hold up along the Gulf Coast. The same crew handles your project from the first call through the final walkthrough, so nothing gets lost between the estimate and the finished job.
Services
What Suncoast Screen does
Every service on this list is something Suncoast Screen handles directly across Manatee and Sarasota County. Pool cage restoration covers aging enclosures that need frame inspection, hardware replacement and fresh mesh throughout. Full and single-panel re-screens address anything from one storm-torn section to an enclosure that has simply reached the end of its mesh life. Lanai and patio re-screens follow the same process. Screen door repair includes alignment, hardware and mesh. Spline replacement and re-tensioning fix the underlying cause when mesh keeps pulling loose. No-see-um mesh upgrades swap standard fiberglass for a finer weave that keeps the smallest insects out without blocking the breeze.
- 01Pool Cage RestorationRe-screen, new hardware, re-tensioning and door repair in one jobTake a look
- 02Full Pool Cage Re-ScreenThe whole enclosure re-screened with fresh UV-rated meshTake a look
- 03Single Panel Re-ScreenOne torn or sagging panel replaced and matched to the restTake a look
- 04Lanai / Patio Re-ScreenLanai and patio panels re-screened, spline replaced, tightenedTake a look
- 05Screen Door RepairRollers, hinges, latches and closers fixed so the door shuts rightTake a look
- 06Storm & Wind-Damage RepairBlown-out panels and bent frames closed back up, damage photographedTake a look
- 07Spline Replacement & Re-TensioningDried-out spline replaced so screens stop rippling and popping outTake a look
- 08No-See-Um Mesh UpgradeA tighter 20x20 weave that keeps the tiniest biters outTake a look
The problem
Why screens fail faster here than anywhere else
Salt air is relentless on screen hardware. Aluminum frames pit, spline channels dry out and shrink, and the fasteners that hold everything together can corrode to the point where mesh tension disappears even when the screen itself looks intact. Florida storm seasons add wind loading that stresses frames and pulls mesh loose from corners first. A patch over bad spline or a corroded corner connector might look fine the day it goes in and bubble out within a season. Understanding what actually caused the failure is the only way to fix it so it stays fixed, and that requires someone who looks at screens every day, not a general handyman fitting it between other trades.
Step by step
How a typical job goes
Assessment and estimate
The first step is a look at what you actually have. That means checking the damage you called about along with the frame, spline channels and fasteners around it. A pool cage that took wind damage, for example, may have bent frame sections or pulled anchors that need to be addressed before new mesh will hold. You get a clear picture of what needs to happen and what it will cost before any work begins. There are no surprises added at the end of the job.
The repair or re-screen
Work is scheduled and carried out by the same people who did the estimate. For a single panel or screen door, that often means one visit. A full pool-cage re-screen or storm-damage restoration takes longer, and the timeline is explained up front. Mesh is rolled in tight and spline is set firmly into the channel so the screen sits flat and holds tension. The goal is a result that does not need a follow-up visit because something was rushed or undersized.
Walkthrough before the crew leaves
Before the job is called complete, the work gets a walkthrough with you present. Every panel is checked for consistent tension and screen doors are opened and closed to confirm alignment and latch engagement. Any debris from the job is cleared before we leave. If something does not look right to you, it gets fixed on the spot. The walkthrough is not a formality. It is the moment when you can see exactly what was done and ask about anything you noticed during the repair that was not part of the original scope.
Our approach
Screen work only, done thoroughly
Limiting the work to screens means every tool, every roll of mesh and every piece of hardware on the truck is chosen for this one trade. When Suncoast Screen arrives for a single-panel re-screen, the spline groove and frame section get checked before new mesh goes in, and so do the fasteners at the corners. If something adjacent is about to fail, you hear about it during the visit, not after the next storm. Hardware is selected for coastal exposure: that means corrosion-resistant fasteners and spline sized correctly for the mesh weight being installed, whether that is standard fiberglass, no-see-um mesh or a heavier wind-rated material.
Where we work
Manatee and Sarasota County service area
Suncoast Screen works throughout Manatee and Sarasota County. That includes Bradenton, Sarasota, Venice, Englewood, North Port, Lakewood Ranch, Palmetto and the barrier islands from Anna Maria through Siesta Key and Casey Key. Coastal properties get the same visit as inland ones, and the hardware selected for a job near the water accounts for the heavier salt exposure those locations see. If you are unsure whether your address falls within the service area, a quick call or email will confirm it. Most of the county is covered.
- Bradenton
- Lakewood Ranch
- Parrish
- Palmetto
- Ellenton
- Anna Maria Island
- Sarasota
- Siesta Key
- Longboat Key
- Lido Key
- Casey Key
- Osprey
- Nokomis
- Venice
- North Port
- Englewood
Get it sorted
Ready to get your screens sorted?
One blown-out panel or a pool cage that has been deteriorating for a few seasons, the process starts the same way: an honest look at what you have and a price before work begins.
Suncoast Screen works across Manatee and Sarasota County, handling pool cage restoration, full and single-panel re-screens, lanai and patio work, screen door repair, spline replacement, and no-see-um mesh upgrades. Because screens are all it does, the crew that comes to your property knows this work inside out. They are not fitting you in between roofing calls or pressure-washing jobs.
Call 888-825-7696 or send an email to hello@suncoastscreen.com to set up a visit. Bring any questions you have about the frame, the mesh type or what the repair involves. There is no cost to asking, and a straight answer is easier to get from people who do this work every day.